for stagecraft

8TA5046 - Aluminum tube Ø 50 mm round sect. for Top battensfor Ballast tubes8TA 3027 - Aluminum tube Ø 30 mm round sect. for Ballast tubes8TF 34 - Galvanized iron tube Ø 28 mm round sect. for Ballast tubes
View all
Teatro Sociale Bonoris Top battens made of Tubes for stagecraft and used to hang a Stage masking made of COS - Oscurante molton.They are part of a Manual fly facilities system made of Mantegni, 3E - Poly rope, 4LR - Wooden blocks and a wooden Flyloft.
Laura Pausini, ''Greatest Hits World Tour'' A top made of black COS - Oscurante molton is lowered on the stage and it shows a silver lozenge decoration painted with the NRD - Painted embroidery technique.The top is hung from a Top batten by means of WLA - Ties.
María Pagés, ''Utopia'' The elastic backdrop made of LWE - Windel hangs from a curved Top batten and is endowed with a curved Ballast tube tending its underside.The Ballast tube is used to lift the bottom edge of the backdrop in an arc and bring it back to the ground.
Tableau vivant It is not unusual to find the Tubes for stagecraft employed in the realization of many light structures.
Polyvalent Center of Brusaporto The structure for hanging a valance, the curtain wings and the stage wings was made of 8TA5046 - Aluminium tube with round section Ø 50 mm and 8C50 - Clamp Ø 50 mm + M8 nut.
If required, the Tubes for stagecraft can be bent up to a radius of 50 cm.
Bétonsalon, ''Hier revient ...'' Double-sided curtain made up of natural and night blue COS - Oscurante molton.It was hung to a Top batten made of raw Ø 5 cm Aluminum tube, curved with a constant 6.25 m radius and fixed to the ceiling with 8C50 - Hanging Clamps Ø 50 mm.
The Tubes for stagecraft with a round section are used to make the Top battens and the Ballast tubes.
The Top battens are bars for hanging light loads, such as borders, wings, light backdrops and screens.
They can be secured to the bearing structures with various accessories, including the 8C50 - Clamp Ø 50 mm + M8 nut.
If movable to be lifted by Manual fly facilities, they are supported by textile ropes usually tied with clove hitches.
The distance between the fixing points depends on the load and does not exceed 3 m.
Top battens of various lengths can be made by joining the segments with their connectors, normally without exceeding 12 m, in which case they require at least 5 suspension points.
The Tubes for stagecraft are also used for the Ballast tubes to be inserted in the bottom pocket of backdrops and screens, these too to be joined with connectors, with no length limits because they are supported by the backdrops themselves.
Upon request, the Tubes for stagecraft can be curved and enamelled.
8TA 050-20 - Aluminum tube with round section Ø 50 mm
external Ø
internal Ø
50 mm
46 mm
2 mm
length of the bars
600 cm
815 g / m

8TA 030-15 - Aluminum tube with round section Ø 30 mm
external Ø
internal Ø
30 mm
27 mm
1,5 mm
length of the bars
600 cm
370 g / m

8TF 34 - Galvanized iron tube with round section Ø 28 mm
external Ø
internal Ø
27,75 mm
23,05 mm
2,35 mm
length of the bars
600 cm
1.410 g / m

by the piece

This material was used for...

Ad Hok [adhɔk]

Commercial premises

Bétonsalon, ''Hier revient ...''

Exhibitions, art, architecture

Laura Pausini, ''Greatest Hits World Tour''


María Pagés, ''Utopia''


Massimo Ranieri, ''Sogno e Son Desto 500 volte''


Michel Sardou, ''Bercy 2001''


Polyvalent Center of Brusaporto

Curtains for multi-purpose settings

Renato Zero, ''Amo Tour''


Tableau vivant

Theatre ''di figura''

Teatro dell'Opera dei Pupi

Curtains for historical theaters

Teatro Sociale Bonoris

Curtains for historical theaters

Information on data processing