Верхние рейки и трубы

The Трубы для сценографии with a round section are used to make the Верхние рейки and the Балластные трубы.
The Верхние рейки are bars for hanging light loads, such as borders, wings, light backdrops and screens.
They can be secured to the bearing structures with various accessories, including the 8C50 - Зажиm Ø 50 mm + гайка M8.
If movable to be lifted by Ручные подъемные системы, they are supported by textile ropes usually tied with clove hitches.
The distance between the fixing points depends on the load and does not exceed 3 m.
Верхние рейки of various lengths can be made by joining the segments with their connectors, normally without exceeding 12 m, in which case they require at least 5 suspension points.
The Трубы для сценографии are also used for the Балластные трубы to be inserted in the bottom pocket of backdrops and screens, these too to be joined with connectors, with no length limits because they are supported by the backdrops themselves.
Upon request, the Трубы для сценографии can be curved and enamelled.

---

---

---

---