English
The 4N - Pulley block is mainly a multi-line pulley intended for Manual winch fly facilities with 3A - Aircraft cable.
It is designed for fixing to the Metal grids for flyloft, either upright or under-hung, when mounted to the underside of a support structure.
With suitable fixing accessories it can also be used with Fixed pulleys systems.
It can also be fixed to the ceiling with wall plugs.
It is designed for fixing to the Metal grids for flyloft, either upright or under-hung, when mounted to the underside of a support structure.
With suitable fixing accessories it can also be used with Fixed pulleys systems.
It can also be fixed to the ceiling with wall plugs.
Sheave
Ø 110mm multipline sheave
made of polyamide c/w ball bearings
made of polyamide c/w ball bearings
Groove
5 grooves for Ø 5 mm wire rope
Frame
- side plates made of steel, matt black coated
- two sets of mounting holes for overhead or underhung fixing to Metal grids for flyloft
- zincplated steel spacers and safety retainers
- steel shaft
- two sets of mounting holes for overhead or underhung fixing to Metal grids for flyloft
- zincplated steel spacers and safety retainers
- steel shaft
SWL
500 kg - CE Certification (Machinery Directive 2006/42/CE)
safety factor 8
safety factor 8
Weight
2.7 kg
For steel wire rope
3A - Aircraft cable - Ø 4 and 5 mm
For textile rope
3D - DNM Rope - Ø 4 and 5 mm
This material was used for...
2AM - Hand-crank M winch
Winches for fly facilities
3A - Aircraft Cables
Ropes
3D - DNM Rope
Ropes
Fixed pulleys
Rigging systems
Flyloft system
Rigging systems