Catalogue
English
Data sheet

1Z10 - Wall bracket

 

1Z10 - Wall bracket The three slots allow the bracket to be fixed to the wall using M10 fixings.For the fixing to the bracket of mechanical devices, use the specific components of the latter and the 1Z1005 - C fixing clip.
View all
1Z10 - Wall bracket 1Z10∙400 - Wall bracket length 40 cm1Z1005 - Fixing clip included in item 1Z101Z10∙250 - Wall bracket length 25 cm
LAC Lugano - Teatrostudio The installation operations of a TRX10 Track system by means of 1Z10 - Wall brackets.The rail was suspended at the desired height with 100 cm threaded rods that made it possible to overcome the obstacle constituted by an access door to the hall, while ...
... more 25 cm 1Z10 - Wall brackets are fixed to the rail by means of 1T37 - 150 mm Threaded Rods.The last 1Z10 - Wall bracket on the right is the 40 cm long type and it allows fixing a curve.The track surrounds the entire hall and it is intended to support ...
... an Acoustic curtain made up as a matter of fact of 16 wings made of black FMB - Macbeth 400 velvet with flat making.The air layer between the velvet and the wall increases the sound absorption properties of the backdrop.The track allows to accumulate or unfold the wings, thus varying the acoustic configuration of the hall.
1Z10 - Wall bracket Fixing example for round section tubes.1Z10∙250 - Wall bracket length 25 cm1Z1005 - Fixing clip8C∙30 - Hanging Clamp Ø 30 mm with M8 nut8TA∙030 - Ø 30 mm Aluminum tubeThe fixing accessories ...
... are commonly traded and available everywhere.A - M8 - 45 mm boltB - M8 washer, 18 mm external ØC - M8 washer, 38 mm external Ø
1Z10 - Wall bracket The three slots allow the bracket to be fixed to the wall using M10 fixings.For the fixing to the bracket of mechanical devices, use the specific components of the latter and the 1Z1005 - C fixing clip.
The 1Z10 - Wall bracket is designed for a simple and safe fixing of various types of mechanical devices and components.
Among those, the track systems (Kompas, TRX10, Laser and 1A - AZQ) for the Traveler opening of curtains and backdrops.
The fixing distance can be easily and immediately adjusted by sliding the 1Z1005 - C fixing clip along the gap between the two bearing bars.
It is available in 25 and 40 cm lengths.

Each 1Z10 - Wall bracket includes one 1Z1005 - C fixing clip.
Additional clips can be purchased separately.
Material
structural steel
Colour
matte black, powder coated
Slots
for M10 fixings
C fixing clip
standard hole Ø 8.5 mm
modifiable up to 13 mm to accept M12 fixings
1Z10-250
Length: 250 mm
Excursion: 85 ÷ 234 mm
Weight: 950 g
Maximum load: 50 kg
Safety factor: 5
1Z10-400
Length: 40 mm
Excursion: 85 ÷ 384 mm
Weight: 1,250 g
Maximum load: 30 kg
Safety factor: 5

Video & Documentation

58469_2-1z10_250_datasheet.pdf

58469_3-1z10_400_datasheet.pdf

This material was used for...

LAC Lugano

Public places

Information on data processing
Privacy PolicyCookie PolicySettings